Product Description
ASIC miner manufacturers practically stopped releasing new models for Ethereum mining after the 2018 cryptozyme. Existing equipment had a RAM memory size of 4 GB, which was no longer enough by 2021 to load a DAG file, making it impossible to continue mining ETH on the "asics". Innosilicon solved this problem by releasing the A10 Pro line of miners with increased memory and hash rate. In particular, the A10 Pro 7g model in question took the middle niche in the updated line of equipment. The ASIC-mainer's RAM reserve allows it to work until about 2026. Probably, by then Ethereum will switch to the second version using PoS algorithm. The A10 Pro under consideration runs on the Ethash algorithm, which for mining ETH and 19 other altcoins with a hash rate of 720MH / s. The power supply of the equipment is 1300W, the energy efficiency of the equipment is 1.8 J / MH. Advantages:- Complete with its own power supply
- Easy to configure and start mining
- Higher performance and lower cost compared to blockchain on video cards
- High noise level does not allow you to use the miner in a domestic room
Disadvantages:
- High noise level does not allow you to use the miner in a domestic room
Product Parameter
Model | A10 pro |
Brand | Innosilicon |
Crypto Algorithm | ETC HASH |
Hashrate | 720Mh ± 5% |
Power Consumption | 960 W ± 10% |
Power Efficiency | 48.5± 10% @25° C |
Net Dimensions | 350 x 120 x 270 mm |
Net Weight | 7.8 KG |
Packing Size | 362 x 136 x 285 mm |
Gross Weight | 10 KG |
Power supply AC Input voltag | 210~240V |
Power supply AC Input Frequency Range | 47~63Hz |
Power supply AC Input current | 10A |
Networking connection mode | RJ45 Ethernet 10/100M |
Operation temperature | 0~40°C |
Storage temperature | -20~70°C |
Operation humidity(non-condensing) | 10~90% RH |
Operation altitude | Ethernet 10/100M |